The Zopo ZP999 Standard version, powered with mt6592 Pre-orders for this phone were first accepted on September 25 at the Mini Hei online store for 999 RMB (162.93 USD). Those who pre-ordered would get their phones on the 30th. Here’s our review of the Zopo ZP999 standard version and its hardware.
Here’s the case of the Zopo ZP999, all neat and tidy.
Here’s the front side of the Zopo ZP999 standard version.
Here’s the back.
Here’s the phone when it was turned on. The wallpaper has already been changed.
Zopo ZP999 standard version and Zopo ZP998 are exactly the same size.
Their backs also have the same design.
A comparison of the top sides of both phones
A comparison of both phones from the right side.
A comparison both phones from the left side.
The bottom sides of both phones.
A side-by-side comparison of the interior of both phones.
A side-by-side comparison of their rear covers.
The Zopo ZP999 standard version continues the classic design sported by the Zopo ZP998 with many similarities from the size to the way the buttons are set. Even their batteries are the same size, so, they’re interchangeable. However, the SIM slots were changed. Zopo ZP998 has one big SIM slot and one small one, and has support for China Unicom 3G networks. The Zopo ZP999 standard version, on the other hand, has two micro card slots (one micro-SIM slot and one micro-SD slot) and has support for China Mobile 4G networks. The two slots overlap each other. Another difference is that the Zopo ZP999 standard version is not NFC-supported. As a result, there are no NFC-sensing sections all over the phone. This is a phone aimed at the mass market, and so, it’s no surprise that its specifications doesn’t have much improvements from Zopo ZP998. [source]