Current time: 02-Dec-2016, 09:50 PM Hello There, Guest! (LoginRegister)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Spreadtrum SC8810 MT6515 dead (urgent solution needed)
21-Oct-2013, 05:35 PM (This post was last modified: 21-Oct-2013 05:39 PM by sanaullah.)
Post: #1
Spreadtrum SC8810 MT6515 dead (urgent solution needed)
I rooted it which was absolutely fine but I tried to flash a custom rom onto it. I'm not going to lie I had no idea what this involved, what the risks were there , even I flashed it.

Anyway during the installation of the new Rom seemed to be going fine with Research Download and after finish installing it was just died. Since then i cannot get it to turn on and it just doesn't power up. It also won't charge now.
also when plugged into the PC it does not detected , so I'm hoping the fact it's still recognized as something means there may be some hope left.
plzzzz friends tell me what i do,

I have no idea what I'm doing, I am just here with my lovely new phone not turning on.

some persons have given idea of doing heating of the Processor IC / Processor Chip because of Boot ifailure , but how i do this process.
help me friends now.

Thanx in advance.Huh
Find all posts by this user
Quote this message in a reply
21-Oct-2013, 06:15 PM
Post: #2
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
Sorry to hear that you've bricked your phone. You should still be able to flash new ROM using SP flash tool. But, make sure you get the correct ROM this time. You can check http://www.needrom.com or other internet sources, if manufacturer's site does not help.

Warning: heating the processor will not help in this case and may cause hardware damage!
Find all posts by this user
Quote this message in a reply
22-Oct-2013, 06:09 PM (This post was last modified: 22-Oct-2013 06:11 PM by sanaullah.)
Post: #3
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
U r saying that "You should still be able to flash new ROM using SP flash tool. But, make sure you get the correct ROM this time"

but i cannot turn on and it just doesn't power up. It also won't charge now, also when plugged into the PC it does not detected , so how
plzzzz tell me what i do,

Thanx
Find all posts by this user
Quote this message in a reply
22-Oct-2013, 06:34 PM
Post: #4
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
Does SP flash tool recognize and can flash it?
Find all posts by this user
Quote this message in a reply
23-Oct-2013, 04:03 AM (This post was last modified: 23-Oct-2013 04:04 AM by sanaullah.)
Post: #5
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
(22-Oct-2013 06:34 PM)umit Wrote:  Does SP flash tool recognize and can flash it?

Friend i have told that neither Computer detect it nor any other software including SP Flash tool recognize it.

PLzzz tell me what i do?????
Find all posts by this user
Quote this message in a reply
23-Oct-2013, 09:39 AM
Post: #6
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
The evaluation of this kind of mobile phone is very good
Find all posts by this user
Quote this message in a reply
23-Oct-2013, 12:45 PM
Post: #7
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
Evaluation means?????
Find all posts by this user
Quote this message in a reply
23-Oct-2013, 06:30 PM
Post: #8
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
1. Open device manager in control panel
2. Remove your phone battery
3. connect your phone to your PC with USB cable. Do you see any device show up in device manager? Do you see any device when you click scan for hardware changes button?
4. Insert the battery and repeat step 3.
5. Post the results.

Please pay attention that device may show up in device manager only for 1-2 seconds and disappear. If it does, it should be flashable with SP flash tool. If not search internet for unbricking using pins. Like those below:
http://forum.xda-developers.com/showthre...p=45930533
http://www.androidnova.org/unbrick-your-...martphone/

Normally hard unbricking is not needed and either SP flash tool or recovery mode should work.
Find all posts by this user
Quote this message in a reply
25-Oct-2013, 04:37 AM
Post: #9
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
No detection via device manager with battery n without battery.
plzzzzz
Find all posts by this user
Quote this message in a reply
12-Dec-2013, 06:24 PM (This post was last modified: 12-Dec-2013 06:25 PM by Sanaullahshuaib.)
Post: #10
RE: Spreadtrum SC8810 MT6515 dead (urgent solution needed)
now it is detected via USB so what now do???

(12-Dec-2013 06:24 PM)Sanaullahshuaib Wrote:  now it is detected via USB so what now do???

Now what is going on plzzzzzz
Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [ROM] TECHNO L3["MTK 6575 "] HARD BRICKED<NEED URGENT HELP> MDSK 5 4,566 06-Apr-2014 03:45 PM
Last Post: Sanaullahshuaib
  ROM files needed for chinese MT6515(LT26i clone) sanaullah 4 4,782 15-Oct-2013 07:24 AM
Last Post: sanaullah

Forum Jump: